Getting Can Find ChipID while loading to ESP32S


#1

Dear All,

I am getting below error message while registering ESP32S.
Forgetting zs:nodemcu_esp32:e7a4bc050dddcfcc95a52881d92f1d4634052f87
[info] Starting device registration
[info] Burning bootloader…
[info] esptool.py v2.0
[info] Connecting……___
[info] Chip is ESP32D0WDQ6 (revision (unknown 0xa))
[info] Uploading stub…
[info] Running stub…
[info] Stub running…
[info] Configuring flash size…
[info] Auto-detected Flash size: 4MB
[info] Compressed 11408 bytes to 7503…
[info]
[info] Writing at 0x00001000… (100 %)
[info] Wrote 11408 bytes (7503 compressed) at 0x00001000 in 0.7 seconds (effective 134.9 kbit/s)…
[info] Hash of data verified.
[info] Compressed 408752 bytes to 214647…
[info]
[info] Writing at 0x00010000… (7 %)
[info] Writing at 0x00014000… (14 %)
[info] Writing at 0x00018000… (21 %)
[info] Writing at 0x0001c000… (28 %)
[info] Writing at 0x00020000… (35 %)
[info] Writing at 0x00024000… (42 %)
[info] Writing at 0x00028000… (50 %)
[info] Writing at 0x0002c000… (57 %)
[info] Writing at 0x00030000… (64 %)
[info] Writing at 0x00034000… (71 %)
[info] Writing at 0x00038000… (78 %)
[info] Writing at 0x0003c000… (85 %)
[info] Writing at 0x00040000… (92 %)
[info] Writing at 0x00044000… (100 %)
[info] Wrote 408752 bytes (214647 compressed) at 0x00010000 in 19.1 seconds (effective 171.1 kbit/s)…
[info] Hash of data verified.
[info] Compressed 3072 bytes to 156…
[info]
[info] Writing at 0x00008000… (100 %)
[info] Wrote 3072 bytes (156 compressed) at 0x00008000 in 0.0 seconds (effective 1069.0 kbit/s)…
[info] Hash of data verified.
[info] Compressed 1024 bytes to 20…
[info]
[info] Writing at 0x00390000… (100 %)
[info] Wrote 1024 bytes (20 compressed) at 0x00390000 in 0.0 seconds (effective 779.6 kbit/s)…
[info] Hash of data verified.
[info]
[info] Leaving…
[info] Hard resetting…
Checking for updates…
[error] Can’t find chipid


#2

Hi @memohit1990
looks like it keep burning firmware to the chip and doesn’t check if it has finished.
Are you sure the device USB drivers are set properly?

Could you also tell me what OS you are using?