[error] No answer to probe on Wemos 8266


#1

When trying to uplink the “Hello Zerynth” demo, I am getting [error] No answer to probe.
I have ensured no console application is open.
I have “Virtualize”'d the device.

After compile this is what i get:

[info] Got header: d90c00002000e63346000b0000c5fcf7
[info] Got header: d90c00002000e63346000b0000c5fcf7
[info] Got header: d90c00002000e63346000b0000c5fcf7
[info] Got header: d90c00002000e63346000b0000c5fcf7
[info] Got header: d90c00002000e63346000b0000c5fcf7
[info] Got header: d90c00002000e63346000b0000c5fcf7
[info] Got header: d90c00002000e63346000b0000c5fcf7
[info] Got header: d90c00002000e63346000b0000c5fcf7
[info] Got header: d90c00002000e63346000b0000c5fcf7
[info] Got header: d90c00002000e63346000b0000c5fcf7
[info] Got header: d90c00002000e63346000b0000c5fcf7
[info] Got header: d90c00002000e63346000b0000c5fcf7
[info] Got header: d90c00002000e63346000b0000c5fcf7
[info] Got header: d90c00002000e63346000b0000c5fcf7
[info] Got header: d90c00002000e63346000b0000c5fcf7
[error] No answer to probe


#2

Hi @Seth_Stenzel

Are you using the Wemos D1 Mini or another variant of the D1 Mini like the D1 Mini Lite?
If you are using the D1 Mini, Do you reset the device when the message “Please Reset the device” pops up?