I made all steps, from "register" to "virtualize" successfull. Then i open and clone the Hexiwear Example an uplink it.
It look OK.
[info] Compilation Ok
[info] Searching for device e1901d09234f5bfc1f8e488fbc91215a8e5853fc with alias zs:hexiwear:e1901d09234f5bfc1f8e488fbc91215a8e5853fc
[info] Please reset the device!
[info] Searching for device e1901d09234f5bfc1f8e488fbc91215a8e5853fc again
[info] Probe sent
[info] Got header: r2.0.9 bVpYB8LxTHa0K7_aLDNh7w hexiwear 32005005501354e4ffffffffffffb200 ZERYNTH
[info] Found VM bVpYB8LxTHa0K7_aLDNh7w for hexiwear
[info] symbols: 160
[info] Erasing flash
[info] Sending Bytecode: 63920 bytes ( available 974848 )
[info] Uplink done
After this the Hexiwear show nothing. After a Hexiwear Reset the LED flash Red for some seconds, then the LED stay with blue light. Nothing to see in the console or on the Hexiwear OLED.
I repeat this steps more than 10 times, but the Hexiwear shows all time the same - NOTHING.
What can i do?